Find help with blinds around Donnybrook and nearby suburbs.

What blinds, shutters and curtains cost around Donnybrook

Published 2026 price ranges for roller blinds, shutters, curtains, motorised and outdoor blinds, what drives the price and how to compare quotes in Donnybrook.

Most window furnishing quotes are priced per window or per blind, then added up for the house. Published 2026 cost guides put a made-to-measure roller blind at $120 to $250 per window per window supplied and installed, plantation shutters at $250 to $600 per window per window, and custom curtains at $300 to $600 per window per window. Outdoor blinds and awnings are priced per opening and cost more. The figures below come from named published guides and are a starting point for comparing quotes, not a quote for your home.

Published price ranges by product

Product Published range Unit Source
Venetian blind, supplied and installed $80 to $400 per window per window Going Rate, October 2026
Roller blind, supplied and installed $120 to $250 per window per window Going Rate, October 2026
Roman blind, supplied and installed $250 to $450 per window per window Going Rate, October 2026
Plantation shutters, supplied and installed $250 to $600 per window per window Going Rate, October 2026
Custom curtains, supplied and installed $300 to $600 per window per window Going Rate, October 2026
Motorised or smart roller blind, installed $400 to $1,000 per window per window Real Blinds 2026 price guide
Outdoor blind, supplied and installed $350 to $1,500 per blind per blind Going Rate, October 2026
Track-guided outdoor blind, supplied and installed $600 to $1,800 per blind per blind Going Rate, October 2026
Motorised outdoor blind, installed $900 to $1,800 per blind per blind Clear Blinds Australia, Melbourne 2026 guide
Folding arm awning, small to medium, manual $1,200 to $2,500 per awning Going Rate, October 2026
Large motorised folding arm awning with wind sensor $3,500 to $6,000 per awning Going Rate, October 2026

The Going Rate roller blinds guide and its sister pages state national 2026 ranges and say pricing is reviewed monthly. They are indicative. A quote from a provider who has measured your windows replaces them.

What drives the price of blinds and shutters?

Window size. Most products are priced in size bands. A large living room window or a sliding door costs noticeably more than a bedroom window in the same fabric.

Fabric or material. Within roller blinds, a basic light filtering fabric costs less than a premium blockout or a designer range. Shutters move in price from PVC to timber to aluminium.

Number of layers. A double roller or a sheer with a lined curtain on a double track is two products on one window.

Control type. Chain and spring controls are the base price. Motors add to each blind, and a hardwired motor adds an electrician’s charge on top. The motorised blinds page explains when an electrician is needed.

Fitting difficulty. High voids, stair windows, shallow aluminium frames that need face fixing, and outdoor openings that need new framing all take longer.

Travel and access. Rural lots in Beveridge, long driveways and difficult parking can add time.

What a quote should include

A clear quote lists, for each window:

  1. Room and window location.
  2. Product, fabric or material and colour.
  3. Size, and whether it is an inside or outside fit.
  4. Control type and side.
  5. Brackets, fixings and any packers or extra framing.
  6. Cord safety components, such as a chain tensioner or cleat, for any corded product.
  7. Measure, delivery and installation.
  8. Removal and disposal of old blinds if you asked for it.
  9. Warranty terms for the product and the workmanship, stated by the provider and the manufacturer.
  10. Lead time and deposit terms.

What is often left out of a quote?

  • Electrician work and the Certificate of Electrical Safety for hardwired motors.
  • Patching and painting old bracket holes.
  • Extra framing or engineering for outdoor blinds and awnings fixed to lightweight cladding.
  • Hubs, sensors and smart-home links for motorised blinds.
  • Scaffold or platform hire for very high windows.

If any of these apply to your house, ask for them as separate lines so you can compare like with like.

How do you compare blinds quotes fairly?

Put each quote into a simple table by room. Check the fabric names and the fit type match before comparing totals; a cheaper quote may be for an outside fit with a lighter fabric. Ask each provider:

  • Who measures and who installs, and whether the installer is employed or subcontracted.
  • Which manufacturer makes the blinds or shutters, and what warranty that maker gives.
  • How a measuring error is handled, and who pays to remake a blind that does not fit.
  • For outdoor blinds, what the system’s maker says about wind and how the brackets are fixed.

For corded products, the quote should reflect the mandatory installation rule made under the Competition and Consumer Act 2010. The safety standard on the Federal Register of Legislation requires corded coverings in homes to be fitted so a loose loop cannot form low enough for a child, and requires the installer to attach a label with their name and contact details.

Red flags in a blinds quote

  • A price given over the phone for custom blinds without anyone measuring.
  • A large deposit with no lead time or delivery date in writing.
  • An offer to wire a motor into a power point circuit without a licensed electrician.
  • No mention of cord safety on corded blinds, or a promise to leave chains loose.
  • Brand names that change between the quote and the invoice.
  • Pressure to sign on the spot to keep a discount.

Saving money without cutting corners

  • Do the bedrooms and the main living area first, and add shutters or curtains to formal rooms later.
  • Use roller blinds on side and rear windows and spend more on the street-facing rooms.
  • If you might want motors later, ask for a tube and bracket that can take one.
  • For rentals, choose durable fabrics that are easy to clean and meet the Victorian minimum standards for window coverings in bedrooms and living areas.

Local price notes

Most enquiries from Donnybrook and Kalkallo are whole-house orders for new homes, which means the per-window figure adds up quickly. A four-bedroom house with blinds in every room and shutters at the front can run to a dozen or more windows. Older homes in Craigieburn add the cost of removing old blinds and making good. For alfresco areas, see outdoor blinds and awnings, where the per-opening prices are higher. Product detail for the most common choice is on the roller blinds page.

Get quotes for your home

List the rooms, the number of windows in each and the products you are considering, then request blinds and shutter quotes. Your enquiry goes to an independent local provider who measures and prices the job; their quote is the price that counts, not the published ranges above.

Send a job enquiry

Frequently asked questions

Why do blinds quotes for the same house differ so much?

Quotes often differ on fabric range, inside or outside fit, control type, and whether removal, cord safety parts and making good are included. Line the quotes up room by room with the same product names before comparing totals.

Is a measure and quote usually charged?

Some providers include the measure in the quote and some charge for it, particularly for distant or rural addresses. Ask before booking, and ask whether any measure fee comes off the order if you go ahead.

Are the published price ranges on this page including GST?

Each published guide sets its own basis, and this page does not restate it. Always check whether a provider's written quote states GST included or excluded, and compare quotes on the same basis.

How much deposit is normal for made-to-measure blinds?

Custom blinds and shutters are made to your sizes, so providers commonly ask for a deposit before ordering. The amount varies by business. Get the deposit, balance and lead time in writing and pay by a traceable method.

Do motorised blinds cost more to run?

The running cost is small. Battery motors are recharged occasionally, and hardwired motors draw power only while moving and on standby. The main extra cost is the motor itself and any electrician work at installation.