Roller blinds for Donnybrook homes
Roller blinds for new and older homes around Donnybrook: fabrics, double rollers, cord safety rules, price ranges and what to ask first.
A made-to-measure roller blind is the usual first purchase for a new house in Donnybrook because it covers a bare window quickly, suits most aluminium frames and is the cheapest custom option. Published 2026 figures put a supplied and installed roller blind at $120 to $250 per window, with the fabric, the size of the window and the control type moving the price within that range. A local provider measures each opening, confirms the fabric and the fitting method, and quotes in writing before anything is made.

Matching roller fabrics to Donnybrook rooms
A whole-house order at handover rarely uses one fabric everywhere. Expect blockout in the bedrooms, sunscreen mesh or a light filtering fabric in the living areas, and a double roller in one or two rooms.
| Fabric and where it goes | Keep in mind |
|---|---|
| Blockout: bedrooms, a nursery or a media room; keeps out most daylight and gives full privacy | Some light still creeps round the sides, and the room is dark with it down |
| Light filtering: bathroom, study or hallway; softens daylight and gives privacy by day | With lamps on at night, outlines can be seen from outside |
| Sunscreen mesh: family room, kitchen or a west window; cuts glare and some heat while you keep the view | Not private once it is dark outside |
| Double roller: main bedroom or front lounge; mesh and blockout on one bracket | Costs more, and the deeper bracket needs room above the window |
If the window faces west, the Australian Government’s Your Home guide to glazing notes that windows can account for up to 87 per cent of a home’s heat gain and up to 40 per cent of its heating energy loss. An internal blind helps, but it works best when it fits snugly and is paired with outside shade on the worst elevations. Our page on outdoor blinds and awnings covers that side.
Signs it is time to replace or add blinds
- The house came with no window coverings at handover, or only in a few rooms.
- An older blind has a frayed or faded fabric, a loose spring or a cracked bottom rail.
- A chain loop hangs within reach of a small child.
- Morning or afternoon glare makes a TV or computer screen hard to see.
- A rented property needs coverings in bedrooms and living areas to meet the Victorian minimum standards.
What a provider will check or ask for
A careful provider measures every window themselves rather than relying on plans or your tape measure, because one or two millimetres matters for an inside fit. Expect questions about:
- Inside or outside fit. Recessed windows with a deep reveal suit an inside fit. Shallow aluminium frames, common in new estate homes, often need the blind fixed to the wall or architrave above.
- Obstructions. Window handles, winders, security screens and alarm sensors can stop a blind rolling down cleanly.
- Control side and type. Chain, spring, or a motor. Motor options are explained on the motorised blinds page.
- Wall material. Plasterboard over timber or steel framing needs a fixing into the frame, not just the board.
- Who will use the room. A nursery or child’s bedroom needs extra care with the cord or chain.
Cord and chain safety is a legal requirement
Fitting a corded blind in a home is covered by a mandatory national rule made under the Competition and Consumer Act 2010, aimed at stopping cord loops that a young child could reach. The corded internal window coverings safety standard requires a corded blind in a home to be installed so a loose cord cannot form a loop 220 mm or longer below 1,600 mm above floor level. A cleat used to secure a cord must sit at least 1,600 mm above the floor, and a cord guide fixed lower than that must stay attached under a 70 N pull for 10 seconds. On top of that, the fitter has to fix a label showing who installed the blind and how to contact them, and the maker’s warning tag must stay on the cord.
A provider who offers to leave the chain loose “because the client asked” is not following the rule. If you want no cord at all, a spring roller or a motor removes the loop.
What the work involves
For a typical new home the process runs like this:
- Measure and quote, including fabric samples held up at the window.
- Blinds are made to order. Lead times vary by manufacturer and fabric.
- Fitting day: brackets fixed, tubes clipped in, the blind trimmed to sit straight, and the chain tensioner or cleat fitted at a compliant height.
- A check that each blind rolls fully up and down without catching a handle or screen.
Ask for any packaging and offcuts to be removed, and check each blind before the installer leaves.
What it costs
The published range of $120 to $250 per window per window covers standard sizes. Wide living room windows, double rollers and motor upgrades sit above it. Our blinds cost guide for Donnybrook compares roller blinds with shutters, curtains and outdoor options and lists what each quote should include.
Local angle: new estates and bare windows
Estates around Donnybrook such as Olivine, Katalia and Peppercorn Hill hand over houses that buyers then furnish, so many enquiries here are for a whole-house order rather than a single window. If you are in a rental in one of these estates, read the Donnybrook area page for the rental standards that apply. Owners in Olivine can relax about indoor rollers: the clause in the estate’s design guidelines that limits window treatments deals with security blinds and shutters visible from the street, not fabric blinds inside the glass.
What to do next
List each room, the rough window sizes and the fabric you have in mind, and send a roller blind enquiry. An independent local blind business reviews it and, if it suits them, arranges a measure and gives you its own written quote.
Frequently asked questions
- Do blockout roller blinds make a room completely dark?
Close to it, but not fully. Blockout fabric stops light passing through the cloth, yet a gap of a few millimetres at each side lets some light in, more so with an inside fit. Side channels or a pelmet reduce the leak if total darkness matters, for example for a shift worker or a baby's room.
- Can I fit roller blinds myself to save money?
Ready-made blinds can be owner-fitted, and many people do. If you install a corded or chain blind in a home, the mandatory cord safety rules still apply to you: the loop must be secured so it cannot hang low enough for a child to reach. Made-to-measure blinds are usually measured and fitted by the supplier so the size is their responsibility.
- How long do roller blinds take to arrive after measuring?
It depends on the manufacturer, the fabric and how busy the season is. Ask the provider for an expected lead time in writing at the quote stage, and whether any fabric you have picked is on back order.
- Will roller blinds fit around my window winders and handles?
Usually, if the provider knows about them at the measure. Projecting handles and chain winders on awning windows can stop an inside-fit blind dropping straight, so the blind may need to sit on the face of the wall instead. Point out every handle, sensor and security screen when they visit.
- Is a double roller worth the extra cost?
It suits rooms you want bright by day and dark at night, such as a main bedroom facing the street. You get a sunscreen layer for daytime privacy and glare control and a blockout layer for sleep. For a spare room or a laundry a single blind is normally enough.